MICROSLICE is ideally suited to cutting operations where one or more of the following considerations is important...
The material to be cut is hard, soft, friable or delicate in nature
A good surface is required, with minimum surface damage
Cutting losses should be minimized
The cut surfaces require high flatness and/or parallelism
The annular blade is produced from thin stainless steel and is held under tension in a precision chuck. Due to the blade’s extreme thinness and rigidity in the radial direction, annular cutting produces the best surface finishes (leading to time and cost savings in consequent processing), the lowest material losses, the thinnest slices and cuts of the highest parallelism.
Product Highlights
Annular blade provides extremely thin cuts
Straightness of cut means lapping times and material loss is minimized
Low damage cutting suits crystals, bones and teeth, geological samples and fragile or crumbly materials
Intuitive and easy to use
Download article on MICROSLICE Semiconductor &
Crystal Applications
Download Article on MICROSLICE Hard Tissue
Applications
Advanced Damped Counterbalance loading system
Integrated Coolant Recirculation system
