Optical Standards of finish may be achieved with the use of a reciprocating sweep mechanism. This control allows maintenance of surface parallelism and flatness. Sample loading is fully variable, as are the sweep and rotation speeds.
All parts which come into contact with polishing media are produced from either stainless steel or heavy duty plastic and are quickly detachable for ease of cleaning and avoiding cross contamination. A spindle lock allows plates to be changed conveniently.
VERSATILITY
MULTIPOL can use all polishing techniques
including abrasive, diamond, slurry, CMP and etch
polishing.
OPTICAL
STANDARDS
The fully-controllable reciprocating arm
mechanism allows maintenance of plate flatness. This This
means that samples of the highest optical standards of
flatness and parallelism may be prepared.
EASE OF CLEANING
Made possible by simple detachment of all parts
which may cause contamination. This means downtime is
minimized and additional preparation systems may not be
required.
SAMPLE HOLDING
The system can use pushrod, bias, conditioning
ring and precision jig techniques. The latter method
provides the means for the very highest accuracies to be
attained.
PREPARING
THE WIDEST RANGE OF MATERIALS
The exceptional degree of control which is
available for all preparation parameters means that
MULTIPOL's may be configured for hard, soft, and friable
materials, and suits preparations of expensive and unique
research materials.
