Primary links

ULTRATOOL

Manual Fiber Optic Polishing Tool

ULTRATOOL was designed for manual polishing of fibers, either supported (connectorized) or non-supported (bare fibers), The tool uses various replaceable modules which are available for all types of connectors -- if needed, custom modules can be designed and manufactured by ULTRA TEC.

Key to ULTRATOOL's performance is a height adjust feature that is controlled by a fine pitch micrometer screw thread.

Flat, PC & APC polishes can be performed on all standard connector types. Another common use is bare-fiber polishing applications (flat and angled). ULTRATOOL is capable of holding bare fibers of the full size range and many other materials such as small wafer sections (for planar or edge polishes).

ULTRATOOL can be used completely manually on a staionary glass lapping plate or as a manual tool interface with a mechanical polisher such as ULTRAPOL Basic.

Developed for 'In-the-field' and 'Retro-Polishing' applications, the FTTx portable connector/termini/contact polisher from ULTRA TEC provides the performance required by installation professionals for the FTTx, LAN, CATV, and Aircraft/shipboard applications.
Industry-standard polishes are readily achieved due to a robust design and system build along with using the latest techniques.
The polisher can be held at any desired angle during operation. This allows for true portable operation in small workspaces, cross-connects, fiber nodes and wire closets. The unit can be operated with either a battery pack or a power supply (both included with standard package).Developed for 'In-the-field' and 'Retro-Polishing' applications, the FTTx portable connector/termini/contact polisher from ULTRA TEC provides the performance required by installation professionals for the FTTx, LAN, CATV, and Aircraft/shipboard applications.
Industry-standard polishes are readily achieved due to a robust design and system build along with using the latest techniques.
The polisher can be held at any desired angle during operation. This allows for true portable operation in small workspaces, cross-connects, fiber nodes and wire closets. The unit can be operated with either a battery pack or a power supply (both included with standard package).

Click Additional Images to Enlarge

  • ULTRATOOL in use on the ULTRAPOL Basic Polisher
    ULTRATOOL in use on the ULTRAPOL Basic Polisher
  • ULTRATOOLKIT includes the tool and a range of accessories
    ULTRATOOLKIT includes the tool and a range of accessories

Product Highlights

  • Low Cost
  • Use anywhere - truly portable machine
  • Versatile - many standard and custom fixtures are available

 

Order Code Item
1101.6 ULTRATOOLKIT -- package includes 1101.1 tool in carrying case with: 8x spare wear stops, 4 connector inserts (for ST, FC, SC and LC), locking tool, 1 oz bottle of ULTRAPOL B suspension 
2240.1 Glass lapping plate, for manual polishing
1209.1 ULTRAPOL BASIC  polisher, for low-cost powered polishing 
1101.1 ULTRATOOL spare manual tool


WORKHOLDERS

Order Code Workholder style
4003.5 SMA (905)
4003.6 SMA (906)
4004.1 ST
4004.8 ST-APC
4005.1 SC
4005.8 SC-APC
4008.1 Biconic
4011.1 Ferrule Only (2.5mm)
4011.1 Ferrule Only (1.25mm)
4011.8 Angled ferrule only (2.5mm)
4011.9 Angled ferrule only (1.25mm)
4011.XX Contact Holder Assembly (specify contact O.D. & type)
4013.1 MU
4013.8 MU-APC
4014.1 FC
4014.8 FC-APC
4015.1 LC
4015.8 LC-APC
4019.X Bare Fiber (flat)
4019.XX Bare Fiber (angled)

Related Accessories

Bookmark and Share

Featured Product

ULTRAPOL FIBERLAB Module System

ULTRAPOL FIBERLAB Module System is a new product in ULTRA TEC’s Fiber Optic Polishing Product Line.  The main...

TEC Tip

Air Polishing - A Key to successful connector polishing

Epoxy-bead removal is essential to contamination-free polishing. Epoxy can be removed more easily with specific grades of silicon-carbide lapping...