ULTRASLICE
Versatile Precision Saw with Z-Spindle
Quote
- Z-Spindle – Allows for cutting depth to be altered even during operation
- Versatility – The system may be readily converted to handle sample cutting requirements of most shapes, sizes and applications.
- Cutting Accuracy – The use of precision lead screws on all sample feeds means cuts may be positioned accurately
- Long Cuts & Dicing – The large work-table andl layout of the machine allows for long cuts to be achieved – perfect for failure analysis, and QA applications such as longitudinal sectioning of components. Sectioned workpieces may be an end in themselves, or the starting point for lapping and polishing
- Most Blade Types – The system accepts a wide range of O.D. diamond and abrasive blades for standard cutting, and is readily adaptable to accept special ‘dicing’ blades for the smallest kerf.
Description
Versatile Precision Saw with Z-spindle
Developed to facilitate precision sectioning applications in Industry and Research, ULTRASLICE Precision Saw provides the user with a unique combination of features:
VERSATILE SAMPLE HOLDING
The system may be readily converted to handle sample cutting requirements of most shapes, sizes, and applications.
CUTTING ACCURACY & CONSISTENCY
The use of precision lead screws on all sample feed mechanisms mean that cuts can be positioned accurately. All-metal construction and an accurately calibrated spindle movement assures low transmission of vibration to the workpiece. This gives reproducibility of performance for cutting materials of widely varying mechanical properties; from the hardest steels and non-metallics down to delicate crystal materials.
LONG CUTS & DICING
The large work-table and overall layout of the machine, allows for long cuts to be achieved, indexed in the Y direction with the integral motorized table feed.
MOST BLADE TYPES
The system accepts a wide range of O.D. diamond and abrasive blades for standard cutting, and is readily adaptable to accept special ‘dicing’ blades for the smallest kerf.
SPEED & POWER
ULTRASLICE has the power and range of blade speeds to achieve higher cutting rates when necessary.
The system features an integral coolant recirculation system which extends blade life and clears cutting debris to improve cutting rate and surface quality. The fully-enclosed splashguard may be opened to allow full access to the cutting area.
ULTRASLICE can handle sample cutting requirements of all shapes, sizes and applications. Samples may be presented to the blade with table attachments (X, Y, W, and Z direction accessories).
All system controls are positioned on a conveniently located panel. An automatic cut-out is provided so that ULTRASLICE may be left unattended during a cutting cycle.
Product Brochure
Related Consumables
-
Abrasive Blades
For Precision Saws With 0.5 Inch Arbor (Spindle)- Precision Sawing of non-ferrous and ferrous components
- Suit many materials, titanium alloys for medical and QC applications
- 0.5″ ID to suit ULTRASLICE and other precision saws
-
Aquigrind
Water Soluble Cutting and Lapping Oil- General purpose water-based vehicle
- Helps achieve good sawed surface
- Suspends loose powder abrasives during lapping
-
Crystal Wax
Mounting Compound- Softens at 71°C (160°F) for easy mounting
- Strong bond
- Removed completely with Acetone
-
Cutting & Lapping Oil
- General purpose oil-based vehicle
- Helps achieve good sawed surface
- Works with hygroscopic samples
- Suspends loose powder abrasives during lapping
-
Dresser Stick – Fine
For Re-Dressing Diamond BladesAllows for re-redressing of diamond blades, in case they become clogged with material.
-
Flanges (Cheek Plates)
For Precision Saws With 0.5 Inch Arbor (Spindle)- Improve blade performance
- Decrease kerf
- A range available for fine tuning the sawing application
Related products
-
ULTRACOLLIMATOR
Sample Parallelism Alignment With LASER Precision- Works in conjunction with tilt controls to control sample alignment
- Improves alignment accuracy up to 20X
- Suits topside & backside electronic sample polishing
- Suits requirements for double sided polishing
-
ULTRASPEC-III
3 Wavelength Laser Illuminator- Improved imaging and contrast
- Three laser lines can be used independently or blended – 670nm, 1064nm and 1300nm
- Suits most backside microscopes
- Assists and optimizes emission microscopy, Laser, FIB, voltage, thermal, probing, and most other backside techniques
-
CTC Polisher
Low Volume Bench-top Fiber Polisher- Retro-polishing – Bring already-installed connectors up to current industry requirements
- Low to Medium Volume polishing of Connectors, termini and contacts.
- Cost-Effective Polishing – The use of 2 inch films on the machine make it extremely cost-effective
-
Height Indicators
Fast, Accurate Drop-Down Gauges- Choice of Accuracy
- Digital and Analog versions
- Granite bases available in other sizes for custom requirements
Related products
-
ARC-lite
Antireflective Coating System For Backside Analysis- Fast and convenient – 45 second process
- Up to 30% more transmitted photon efficiency
- Up to 60% improved contrast under NIR
- Inexpensive to own and operate
- Bench-top, quiet, room temp. process
- All package types and sizes
- RC can be done ‘in-house’ – NO BAKING
- Assists and optimizes emission microscopy, Laser, FIB, voltage, thermal, FMI, probing, and most other backside techniques
-
ULTRAPOL Manual Station
For Convenient, Practical Polishing Lab Management- Low cost
- Provides a convenient station for the workday’s polishing activities
- Films, fluids and surfaces can be kept moist overnight with the optional lid
- Entirely manual – DOES NOT have a motor
-
ULTRASLICE Compact
Versatile Precision Saw for Small workspaces & small budgets- Versatility – The system handles samples of most shapes, sizes and orientations.
- Cutting Accuracy – precision lead screws on all feed directions
- Long Cuts & Dicing – A large work-table and ‘open’ system design allows for longitudinal sectioning and dicing
- Sectioned workpieces may be an end in themselves, or the starting point for lapping and polishing
- Most Blade Types – a wide range of diamond and abrasive blades is available.
-
ULTRAPOL FIBERLAB Microscope
QA And Measurement Station For Fiber Lensing With Optional On-Line Camera- Accepts ULTRAPOL Quick Release Fiber Lensing Fixtures
- USB Camera(s)
- QA availability for improving polishing yields and results
- Advanced Suite of Angular and length measurement characteristics in software